EK-M20 is an SDR wireless ad hoc network module based on FPGA. Embedded in 256MB of memory and 32MB of flash memory, with a gigabit Ethernet port and a wireless speed of up to 160M, it is a lightweight MESH device that can be used to access special cameras or live broadcasts. It is very suitable for on-site situation collection and can be widely used in emergency communication in fields such as fire protection, armed police, and the military.
| RF parameters | Networking frequency | 60MHz-6GHz，standard configuration1.410G-1.470GHzRF power amplifier |
| Modulation | DSSS/CCK/BPSK/QPSK OFDM BPSK/QPSK/16-QAM/64-QAM | |
| Transmission power | Core board 0dBm，Standard power amplifier module 33dBm*2 | |
| Receiver sensitivity | Highest-102dBm | |
| Radio Frequency Interface | MMCX*4 | |
| Channel bandwidth | 2M/5M/10M/20M/40M（Adjustable） | |
| Effective bandwidth | Up to120Mbps | |
| Effective distance | 100-150 Km (frame height) | |
| Network/Management | Collocation method | WEB、MESHCOM Management software |
| Number of nodes in self-organizing network | Not less than 50 units | |
| System | MESHCOM ad hoc networks | |
| Physical/Environmental | Operation temperature | -40℃ ~ +65℃ |
| Working humidity | 5% ~ 95%（non-condensing） | |
| Storage temperature | -45ºC ~ +85ºC | |
| Weight | Without heat sink：45g，With heat sink：135g | |
| Size | Without heat sink：100 x 60 x 10mm With heat sink：100 x 60 x 20mm |
|
| Electrical Characteristics | Support voltage | 12-26V power supply |
| Consumption | Average Power 8W@33dBm,16W@36dBm | |
| Peak power consumption | 25W |
If you have any question or comment, please contact us without hesitation. We will reply you as soon as possible.( * is required information)
